Products
-
Expansion Wedge anchor carbon steel for concrete
Specification Product name wedge anchor/through bolt Surface Plain, Zinc plated, black , HDG System ofMeasurement Metric Place of Origin Yongnian, Hebei, China Brand Name TYB Material Carbon steel Q235 Diameter M6, M8, M10, M12, M14, M16, M20,M24 Length 40-400mm Standard DIN,ANSI,ISO,GB Certificate ISO9001:2008 Grade 4.8 Packing Box+Carton+pallet MOQ 1,000pcs Productive Process wire rod→Anneal→Acid cleaing→Draw wire→molding and rolling thread→Heat treatment→Surfac... -
DIN571 Hex head wood screw
This is a nail specifically designed for wood, which will be embedded very firmly in the wood. If the wood is not decayed, it is impossible to pull it out, and even if it is forcibly pulled out, it will bring out nearby wood. One more thing to note is that the wood screws must be screwed in with a screwdriver. Do not knock in with a hammer, it will damage the surrounding wood.
The advantage of wood screws is that the consolidation ability is stronger than nailing, and it can be removed and replaced, which does not hurt the wood surface and is more convenient to use. -
DIN127 Spring washer factory supply
Spring washer are mainly punched out from iron plates.
Spring washer: after lock, use elastic pad have the effect of locking, and of course to a double nut effect is poor.
Single nut + flat mat, play mat: rely on the nut itself locking force and elastic cushion locking performance, a double nut. -
M6 Hex Flange nut DIN6923
Product Flange nut Finish Plain, zinc plated, black, HDG, etc. Measurement system Metric, Imperial (Inch) Application Heavy Industry, Water Treatment, General Industry Place of Origin Yongnian, Hebei,China Brand Name TYB Standard DIN 6923 Size M5-M20 Material Carbon steel Tolerance 4H Type nut Port Tianjin Port Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Sa... -
Carbon steel zinc plated drop in anchor with knurled
1. Drop-in anchors are designed for indoor dry concrete environments,
2. Drop in anchors need an installation tool for each size, the installation video is easy to find on internet.
3. The thread length equals half anchor length, and all sizes of the drop in anchors are fixed if you have a certain thread size.
4. The advantage of the drop-in anchors: nothing protrudes above surface once the anchor is properly installed on the concrete.
5. The drop in anchors just can be used in solid concrete, for it need hammering to install, so do not used in brick or block.
6. The surface of the drop in anchor is always smooth, half and full knurling type are also available for provides greater friction. -
DIN603 carriage bolt round head square neck
Specification Product name Carriage bolt Size M6-M52, 1/4”-2” Grade 4.8 6.8 8.8 10.9 12.9 Material Carbon steel Q235 35k,20MNTiB Standard DIN, ISO, GB, BS, ASTM Thread Coarse thread, Fine thread , Half thread, Full thread Surface Plain, Black, zinc plated, HDG, Dacromet Service OEM/ODM/ Customized Quality control Raw material test, during production test, before packing test Certificate ISO9001, SGS Sample Sample available Packing 25kg bag/carton+pallet Standard ... -
DIN975 thread rod grade 4.8 galvanized
A threaded rod is a fastener and functions thanks to the threading, which causes a tightening action from the rotational movement. Threading on a rod allows other fixings like bolts and nuts to easily screw or fasten to it. -
galvanized 8. DIN934 Hex nut carbon steel black
Notice: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us. -
DIN 125 Flat washer carbon steel zinc plated
Flat washers prevent sinking of bearing surfaces,The main role of flat washers is to increase the size of a screw's bearing surface area, and reduce the surface pressure applied on the fastened object. -
DIN933 mild steel grade 4.8 Hex bolt
Length is measured from the point at which the head sits flat with the surface, to the tip of the threads. Hex, pan, truss, button, socket cap, and round head screws are measured from right under the head to the end of the threads. Flat head screws are measured from the top of the head to the tip of the threads.
